GB MT
adults. Children over the age of 16 may
not use the tool except under supervision.
The manufacturer is not liable for damages
caused by an improper use or incorrect
operation of this device.
General description
See the front fold-out page for
illustrations.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the pa-
ckaging material correctly.
-
Device
-
Cutting disc
(preassembled)
-
Battery-charger
-
Battery
-
Hex key
(4 mm)
-
Storage case
-
Instruction Manual
Description of functions
The cordless angle grinder is suitable for
cutting and grinding metal, stone and
wood materials, plastic, tiles and non-
ferrous metals. There is a special disc for
each of the separate applications. Please
refer to the information from the disc manu-
facturer.
Please refer to the descriptions below for
information about the operating devices.
Overview
1
Protective hood
2
Cutting disc
3 Clamping screw
4 Spindle stop button
5 On/off switch
80
6
Battery Indicator (3 LEDs)
7 Handgrip
8
Battery release button
9
Battery
10
Storage case
11 Hex key
12
Charger power supply cord
13
Green LED
14
Red LED
15
Charger
16 Mounting flange
17 Clamping flange
Technical data
Cordless angle grinder
...............................PWSA 12-Li A1
Rated input voltage
Idling speed (n) .....................19500 min
Dimensions of cutting/grinding disc
...................................... Ø
Bore hole ................................ Ø 10 mm
Maximum diameter
Cutting/grinding disc ............... Ø
Thickness of cutting/grinding discs
......................................... max. 6.5 mm
Grinding spindle thread ..................... M5
Protection
category...........................IPX0
Sound pressure level
(L
) ................... 64.7 dB(A); K
pA
Sound power level (L
measured .......... 75.7 dB(A); K
Vibration (a
) ...... 2.37 m/s
h
Battery (Li-Ion) .......... PAP 12-Li A1
Battery cells ..................................... 3
Model (Type) ........................ C18650P
Nominal voltage .......................12 V
Capacity .................................. 2.0 Ah
Charging time ..........................ca. 1 h
Recharger ...................PLG 12-Li A1
Nominal consumption ................. 40 W
......................12 V
76 x 10 mm
76 mm
= 3 dB
pA
)
WA
= 3 dB
WA
; K= 1.5 m/s
2
-1
2