Data Transmission To The Smartphone/ Tablet; Ambient Conditions; Electrical Specifications - Benning CM 10–PV Bedienungsanleitung

5.3 Data transmission to the smartphone/ tablet

The BENNING CM 10-PV is provided with a Bluetooth
face for real-time wireless transmission of measured values to an Android or IOS
device.
The "BENNING MM-CM Link" app required for this is available in the Google Play
Store and in the Apple App Store.
Google Playstore
The "BENNING MM-CM Link" app offers i.a. the following functions:
- Displaying of the measured values in real time and storage as CSV file.
- Download of the data logger LOG (up to 4,000 measured values) from the
BENNING CM 10-PV.
To activate the Bluetooth
CM 10-PV (symbol " " flashes). As soon as a Bluetooth
hed, the symbol " " is displayed permanently.
Range in open space: approx. 10 m
6.

Ambient conditions

- The BENNING CM 10-PV is intended for making measurements in dry envi-
ronment.
- Maximum barometric elevation for making measurements: 2000 m,
- Overvoltage category / installation category of the BENNING CM 10-PV:
IEC 60664/ IEC 61010 → 600 V category IV; 1000 V category III
- Contamination class: 2,
- Protection class: IP 30 (DIN VDE 0470-1, IEC/ EN 60529)
IP 30 means: Protection against access to dangerous parts and protection
against solid impurities of a diameter > 2.5 mm, (3 - first index). No protection
against water, (0 - second index).
- Operating temperature and relative humidity:
For operating temperatures from 0 °C to 30 °C: relative air humidity lower
than 80 %,
For operating temperatures from 31 °C to 40 °C: relative air humidity lower
than 75 %,
For operating temperatures from 41 °C to 50 °C: relative air humidity lower
than 45 %.
- Storage temperature: The BENNING CM 10-PV can be stored at tempera-
tures between - 10 °C and + 60 °C, at a relative air humidity lower than 80 %
without batteries.
7.

Electrical specifications

Note: The measuring precision is specified as the sum of
- a relative fraction of the measured value and
- a number of digits (counting steps of the least significant digit).
This specified measuring precision is valid for temperatures in the range from
18 °C to 28 °C and relative humidity less than 80 %. The stated accuracy is
specified for 1 % to 100 % of the final measuring range value.
Additional specifications for AC functions:
The measuring value is gained and indicated as effective value (True RMS, AC
coupling). In case of non-sinusoidal curves, the indicating value becomes inaccu-
11/ 2019
LOG
2 Sec
LOG
2 Sec
interface, press the Bluetooth
®
BENNING CM 10–PV
Press
>2Sec
HOLD
Low Energy 4.0 inter-
®
App Store
key 7 at the BENNING
®
connection is establis-
®

32