Discotom-6 Rear View; Noise Level; Power Supply; Direction Of The Cut-Off Wheel - struers Discotom-6 Gebrauchsanweisung

Discotom-6 Rear View

Noise Level

Power Supply

Direction of the Cut-off Wheel

4
Discotom-6
Instruction Manual




 Upper back plate
 Cooli Unit connection
 Electrical cable for power supply
 Cut-off wheel locking handle
 Exhaust hose
 Water outlet to Flushing Gun
 Flushing Gun
 Drainage hose
 Water outlet
 Water inlet
Approx. 67 dB (A) measured at idle running, at a distance of
1.0 m/39.4" from the machine.

First check that the mains voltage corresponds to the voltage
stated on the type plate on the side of the machine.

Discotom-6 is factory mounted with an electric cable. Mount a
plug on the cable:
Black and brown = phase
Yellow/green = earth
Check that when the power is turned on, the cut-off wheel rotates in
the direction indicated by the moulded arrow in the guard of
Discotom-6. If the direction of rotation is incorrect, switch the two
phases.
 



