struers Discotom-6 Gebrauchsanweisung Seite 135

Letter of conformity
Date 2013-03-14
Letter of conformity: Safety hood/window for the following equipment
AbraPlan-20
AbraPol-20
Discotom-5/-6/-10/-60/-65/-100
Labotom-3
Labotom-5
Labotom-15
Axitom/-5
Exotom-100/-150
Magnutom-400/-500
The safety hoods/window primary function is to protect against samples not clamped properly.
The safety hood is made from PETG, which is generally used in all Struers machines as "safety glass".
PETG is resistant to scratches and chemicals and provides the highest degree of safety for the
operator.
Commodity Supplier:
Producer:
Supplier:
This is to certify that the product is produced according to regulations from the Commodity Supplier.
Yours faithfully
Flemming Perret-Gentil
R&D Manager
R&D Department, Equipment
+45 44 600 913 (direct)
+45 27 130 890 (mobile)
flemming.perret.gentil@struers.dk
www.struers.com
PETG thickness: 8 mm
PETG thickness: 8 mm
PETG thickness: 4 mm
PETG thickness: 4 mm
PETG thickness: 3 mm
PETG thickness: 5 mm
PETG thickness: 4 mm
PETG thickness: 4 mm
PETG thickness: Front: 10mm, Side: 8mm
RIAS A/S, Industrivej 11, 7000 Roskilde, Denmark
NEOPLAST ApS, Tingbjergvej 4, 4632 Bjæverskov, Denmark
Struers A/S, Pederstrupvej 84, 2750 Ballerup, Denmark
Struers A/S
Pederstrupvej 84
DK-2750 Ballerup, Denmark
Phone +45 44 600 800
Fax +45 44 600 801
struers@struers.dk
www.struers.com
Bankers:
Nordea Bank Denmark A/S
Account no.: 2191-0126305060
VAT no.: 15683309
ISO
9001 and 14001 certified QEMS