Assembling And Attaching The Tilting Arm - Panasonic AW-PH360L Bedienungsanleitung

Installation

2. Assembling and attaching the tilting arm

When assembling the tilting arm, tighten up its screws using the specified torque.
After attaching the arm, check that there is no play in its mounting.
The steps taken to attach the arm differ depending on the installation direction.
1.
Attaching the camera mounting plate
Attach the camera mounting plate to the tilting arm using the two guide screws
(M4 C 18 mm) supplied.
For installation on the ceiling
Guide screws
p Attach the camera mounting plate in such a way that the centre marker of the
plate is aligned with the position of the applicable number for the tilting arm (see
table below).
When using the AK-HC1500, AK-HC1800 or AW-HE870 camera
Lens
AK-LZ20M85
HAs18x7.6BMD
ZA12x4.5BMD
ZA12x4.5BEMD
ZA17x7.6BMD
ZA17x7.6BEMD
ZA22x7.6BMD
ZA22x7.6BEMD
XA20sx8.5BMD
HJ22ex7.6B ITS
HJ17ex7.6B ITS
KJ22ex7.6B ITS
KJ17ex7.7B ITS
KJ13x6B KTS
(Be sure to ask your dealer to install the unit.)
Centre marker
Camera mounting plate
Camera
AK-HC1500/AK-HC1800
- 17 (E) -
For stand-alone installation
6
8
11
11
9
9
11
10
6
11
9
11
9
9
AW-HE870
6
8
11
11
9
9
11
11
6
11
9
11
9
9