General Safety Directions - Parkside PSTDA 20-Li B3 Originalbetriebsanleitung

The rechargeable battery
only reaches its full capacity
once it has been charged
several times.

General Safety Directions

Caution! When using
power tools, observe the fol-
lowing basic safety measures
for the prevention of electric
shocks and the risk of injury
and fire.
Please read all these instruc-
tions before using this electric
tool and please keep the
safety instructions.
Careful handling and use of
battery devices
• Only recharge batteries using
chargers belonging to the Park-
side X 20 V Team series. If a
charger that has been designed
for a particular type of battery
is used to charge other batter-
ies, there is a risk of fire.
• In the power tools, use only the
batteries designed for the pur-
pose. The use of other batteries
may result in injuries and risk of
fire.
• Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could cause
bridging of the contacts. A short
circuit between the battery con-
tacts may cause burns or fire.
• If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event
of accidental contact, rinse off
with water. If the liquid gets into
eyes, seek medical assistance.
Leaking battery fluid may cause
skin irritations or burns.
• Do not use damaged or altered
batteries. Damaged or altered
batteries can be unpredictable
and lead to fire, explosion or
risk of injury.
• Do not expose batteries to fire
or elevated temperatures. Fire
or temperatures over 130 C°
can cause an explosion.
• Follow all instructions for charg-
ing and never charge the bat-
tery or the battery-powered tool
outside the temperature range
stated in the operating instruc-
tions. Incorrect charging or
charging outside the permitted
temperature range may destroy
the battery and increase the risk
of fire.
Service
• Never repair damaged batter-
ies. All battery repairs should be
GB MT
37