Correct Handling Of The Battery Charger - Parkside PSTDA 20-Li B3 Originalbetriebsanleitung

GB MT
carried out by the manufacturer
or authorised customer service
centres only.
Special safety directions for
battery-operated tools
• Ensure that the device is
switched off before inserting the
battery. Inserting a battery into
a power tool that is switched on
may result in accidents.
• Recharge the batteries indoors
only because the battery charg-
er is designed for indoor use
only.
• To reduce the electric shock haz-
ard, unplug the battery charger
from the mains before cleaning
the charger.
• Do not subject the battery to
strong sunlight over long pe-
riods and do not leave it on a
heater. Heat damages the bat-
tery and there is a risk of explo-
sion.
• Allow a hot battery to cool be-
fore charging.
• Do not open up the battery and
avoid mechanical damage to
the battery. Risk of short circuit
and fumes may be emitted that
irritate the respiratory tract. En-
sure fresh air and seek medical
assistance in the event of dis-
comfort.
38
• Do not use non-rechargeable
batteries!
• Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric
shock or fire.
Correct handling of the
battery charger
• Keep the equipment away from
children and pets. Children
should be supervised in order
to ensure that they do not play
with the equipment.
• Only use chargers belonging to
the Parkside X 20 V Team series
to recharge the battery. Risk of
fire and explosion.
• Before each use, check the
charger, cable and plug and
have them repaired by quali-
fied professionals and only with
original parts. Do not use a de-
fective charger and do not open
it up yourself. This ensures that
the safety of the device is main-
tained.
• Connect the charger only to a
socket with an earth. Ensure
that the mains voltage matches
the specifications on the charger
rating plate. Risk of electric
shock.
• Disconnect the charger from the
mains before closing or open-