Herunterladen Inhalt Inhalt Diese Seite drucken

Remote Control ( Optional) - GUTMANN Invisible Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Hood body
1.)
Hose Connection Supports
2.)
Suction slots
3.)
Filter modul
4.)
Filter
5.)
Control element
The control panel consists of 6 buttons.
The first (1) four buttons control the fan
power:
Button "1"
= low fan power
Button "2"
= medium fan power
Button "3"
= high fan power
Button "Int"
= Intensive setting
Press any button to switch on the appli-
ance. Press the backlit button to switch
off the appliance. The intensive setting
automatically switches back to high fan
power after three minutes (setting 3).
Automatic after-run (2)
Press the button with the clock symbol
to activate the after-run time. The ex-
tractor hood switches back from level 3
to level 1and runs for ~15 min. at this
setting before switching off.
Display for Service (3) When lit (yellow)
Servicing is required. Pressing the dis-
play disappears.
Grease filter saturation (2) limit:
flashes after 14 days (even if no cook-
ing takes place during this time) or 15
fan hours.
Please clean the filter and reset the
display. Remove the metal filter and
keep the Button pressed for approxi-
mately 10 seconds in the direction of
the fan symbol until the red light goes
out.
Remote Control (
ON/OFF (1)
To switch on, press the field with the
ON/OFF symbol. The fan runs at the 3.
level. To switch off, press the ON/OFF
symbol again.
Increasing fan power (2)
Press the symbol Increase fan power.
The fan power is increased by one level
each time the field is pressed.
Reducing fan power (3)
Press the symbol Reduce fan power.
The fan power is reduced by one level
each time the field is pressed until level
1 is reached.
Grease filter saturation
Button for Service (4)
When lit (yellow) Servicing is required.
Pressing the display disappears.
Intensive level (5)
Maximum fan power is reached by
pressing the button Intensive level. The
fan power switches back by one level
after 5 minutes.
Automatic follow-up time (6)
The automatic follow-up time is acti-
vated by pressing the field with the Fol-
low-up time symbol (2
left). The follow-up time symbol lights
up. The extractor hood switches from
level 3 back top level 1 and runs at this
level ~15 minutes before switching off.
en
optional)
1
4
2
5
3
6
nd
symbol from the
13

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis