Docking Station; Power Supply; Interfaces - ACD GRUPPE M2Smart Set Kurzübersicht

The charging and communication contacts are very sensitive! The
mobile terminal and the replacement rechargeable battery may
only be inserted in and removed from the docking station as
described above. Do not touch the contact with your fingers or
CAUTION
with objects such as pens, screwdrivers, etc.

17.2 Docking Station

17.2.1

Power supply

®
The M2Smart and the replacement rechargeable battery may only be charged in the DS2Smart
station with the appropriate power supply.

External power supply for DS2Smart
o Input voltage
o Output voltage

Power cable (country-specific)
17.2.2

Interfaces

The interfaces of the DS2Smart
Fig. 20: Interfaces of the DS2Smart
The connections are described from left to right:

The USB socket type A is the USB host interface.
The connected USB devices are identified by the USB host adapter in the M2Smart

The RJ45 socket is the Ethernet interface (10/100 Mbit).
The network communication takes place via the Ethernet interface on the M2Smart

Insert the DC connector of the power supply in the DC socket for the supply voltage.
M2Smart_Set_Kurzübersicht_Brief Overview_V1.00_de_en
®
~
100 - 240 V AC; 1.0 A max.; 50 - 60 Hz
15 V DC; 2.4 A
®
docking station will be described below. These are mounted on the rear.
®
®
docking
®
.
®
.
35 / 50