Status Leds - ACD GRUPPE M2Smart Set Kurzübersicht

To insert the rechargeable battery in the device, tip it diagonally downward and place it in the rechargeable
battery compartment. Insert the rechargeable battery so that the contacts are aligned with the contacts of the
device. Then the rechargeable battery can be folded downward so that the lock snaps in. Then the hand
strap can be hooked back in.
Fig. 15: Inserting the rechargeable battery
17.1.7

Status LEDs

The Status LEDs of the M2Smart
Fig. 16: Status LEDs of the M2Smart
The LEDs are arranged as follows from left to right: On LED, charge LED, application LED
On LED lit green: The On LED lights up green when the device is turned on or is just starting.
Charge LED lit green:
Charge LED flashing:
Application LED:
M2Smart_Set_Kurzübersicht_Brief Overview_V1.00_de_en
®
mobile terminal will be described below.
®
The charge LED lights up green while the device is being charged.
The charge LED flashes green if no rechargeable battery is detected.
The application LED can be controlled by any application on the device and
its function can be freely defined.
33 / 50