Werbung
Verfügbare Sprachen
Verfügbare Sprachen
17
Technical Information
Inlet Screen Installation
Inlet Screen Installation
The inlet screen prevents the blades of the pump from being damaged
by debris greater than 5.2 mm diameter. The inlet screen does reduce
the pumping speed by about 10%. The inlet screen is fitted in the
upper part of the pump, as shown in the figure.
The following figure shows the ISO 250 F pump flange section with
the protection screen fitted on it. As you can see, the overall
dimensions do not change as the inlet screen remains inside the
pump profile.
244/260
Turbo-V 2300 TwisTorr Pumps User Manual / 87-901-017-01
(B)
Werbung
Kapitel
