Connecting External Playback Devices (Aux Mode) - Silvercrest SBDB 5 A1 Bedienungsanleitung Und Sicherheitshinweise

Button functions during playback via Bluetooth
Button
ENTER / SCAN
TUNE+
TUNE−
SOURCE /
NOTE
► The volume on the radio and on the external playback device can be ad­
justed independently of each other . For example, if the volume of the radio
is set to maximum and the volume of the external playback device is set to
minimum, you will hear nothing through the radio .
► It is possible that not all functions will be supported depending on the
external playback device being used and its operating system .
► In an environment with high­frequency interference, you may experience
noise interference during music playback in Bluetooth
as the interference has ceased, music playback should automatically
continue in Bluetooth

Connecting external playback devices (AUX mode)

In AUX mode, you can connect external playback devices such as a smartphone or
an MP3 player to use them as the playback source for the radio .
NOTE
► Switch the radio and the external playback device off before connecting
them . Note also the operating instructions for the device that you want to
connect to the radio .
♦ Open the AUX IN compartment
three catches
AUX IN compartment
CLOSE with the corresponding arrows on the catches
compartment
■ 54 │ GB │ MT
Function
► Press briefly to start/stop playback .
3
► Press briefly to move to the next track .
9 ► Press for approx . 2 seconds to change to fast
forward mode .
► Press briefly to go to the beginning of the
current track . Press briefly again to go back to
the previous track .
8
► Press for approx . 2 seconds to change to
rewind mode .
► Press for approx . 2 seconds to unpair the
4
devices .
mode without any further problems .
®
z
of the AUX IN compartment
u
can be opened . Note also the labels OPEN and
z
.
z
mode . As soon
®
on the rear of the device by turning the
anticlockwise until the
z
of the AUX IN
u
®
SBDB 5 A1