Connecting external playback devices (AUX IN mode)
In AUX IN mode, you can connect external playback devices such as a smart-
phone or an MP3 player to use them as the playback source for the radio .
NOTE
►
Switch the radio and the external playback device off before connecting
them . Note also the operating instructions for the device that you want to
connect to the radio .
♦
Connect the external playback device to the AUX IN socket
using the supplied AUX cable .
♦
Briefly press the
♦
Briefly press the SOURCE /
AUX IN appears on the display
♦
Turn on the external playback device and start playback .
♦
Afterwards, set the desired volume using the VOLUME |
SCAN dial
the external playback device .
♦
To exit AUX IN mode, turn off the radio and the external playback device .
Remove the AUX cable from the AUX IN socket
Alternatively, you can press the SOURCE /
from AUX IN mode to radio mode or Bluetooth
Connecting headphones
♦
Turn the VOLUME |
lowest volume level .
♦
Plug the jack plug of the headphones into the headphone socket
on the rear of the device . Sound playback now takes place only via the
connected headphones .
♦
Set the desired volume using the VOLUME |
SRH 5 B2
button
to switch on the radio .
2
button
1
on the radio . Alternatively, you can increase the volume on
6
ENTER / SCAN dial
(several times if necessary) until
3
.
of the radio .
w
button
3
mode .
®
anticlockwise to the
6
ENTER / SCAN dial
of the radio
w
ENTER /
to switch directly
e
.
6
GB │ IE
55
■
│