Playback Via Bluetooth - Silvercrest SBDB 5 A1 Bedienungsanleitung Und Sicherheitshinweise

Station information
In FM radio mode, you can show additional station information on the display
♦ Briefly press the INFO / MENU button
following channel information:
–
Programme type (Pty)
–
Signal strength (bar)
–
Time/date
–
Scrolling text (radio text)

Playback via Bluetooth

Pairing devices
Before you start using the radio for music playback via Bluetooth
pair it with a Bluetooth
♦ If necessary, briefly press the
♦ If necessary, briefly press the SOURCE /
activate the Bluetooth
flashes on the display
♦ Set the external playback device so that it scans for Bluetooth
You can find a detailed description of how to do this in the operating
instructions for your external playback device .
♦ From the list of discovered Bluetooth
external playback, select the entry SBDB 5 A1 . The external playback de­
vice will now connect to the radio automatically via Bluetooth
hear a another beep when the connection has been successfully established
and Connected appears on the display
You can now use the radio to listen to music from your external playback device
wirelessly via the radio's speaker .
NOTE
► The next time you turn on the radio, it will connect automatically to the
last­connected external playback device . If your external playback device
does not automatically reconnect to the radio, you will have to re­establish
the connection manually . You can find a detailed description of how to do
this in the operating instructions for your external playback device .
► In Bluetooth
15 minutes if no Bluetooth
Unpairing devices
If you want to connect the radio to another external playback device, you must
first unpair the currently connected playback device:
♦ Press the SOURCE /
beep and Pairing flashes on the display
via the currently connected external playback device .
SBDB 5 A1
®
­compatible external playback device .
®
button
function . You will hear a beep and Connecting
®
followed by Pairing .
1
mode, the device switches itself off automatically after
®
connection is established .
®
button for about 2 seconds . You will hear a
4
repeatedly to display the
0
to switch on the device .
2
button several times to
4
devices in the settings menu of your
®
.
1
. Alternatively, you can unpair
1
GB │ MT
:
1
you must
®
devices .
®
. You will
®
│ 53 ■