Automatic Update - Silvercrest SBDB 5 A1 Bedienungsanleitung Und Sicherheitshinweise

NOTE
► In standby mode, press the
between the time and date display .
12h/24h display
NOTE
► If the 12h display is set, PM appears on the bottom left of the display
from 12 noon until 11:59 at night . From midnight to 11:59 AM, AM
appears on the display
► The default setting for the time is the 24h display .
♦ In the settings menu, press the TUNE+
System appears on the display
♦ Press the
♦ Press the TUNE+
appears on the display
♦ Press the
♦ Press the TUNE+
on the display
♦ Press the
♦ Press the TUNE+
setting (Set 12 hour) or the 24 hour setting (Set 24 hour) .
♦ Press the

Automatic update

The Auto Update function allows you to set whether the date and time are set
automatically via the radio stations' RDS (Radio Data System) signal or manually .
NOTE
► If From radio is set, the date and time are automatically set via the RDS
signal from the radio stations .
► If No update is set, the date and time are not set automatically, but must
be set manually .
► The default setting for the Automatic Update function is From radio .
♦ In the settings menu, press the TUNE+
System appears on the display
♦ Press the
♦ Press the TUNE+
appears on the display
♦ Press the
♦ Press the TUNE+
the display
■ 58 │ GB │ MT
.
1
1
ENTER / SCAN button
or TUNE− button
9
.
1
ENTER / SCAN button
or TUNE− button
9
.
1
ENTER / SCAN button
or TUNE− button
9
ENTER / SCAN button
1
ENTER / SCAN button
or TUNE− button
9
.
1
ENTER / SCAN button
or TUNE− button
9
.
1
ENTER / SCAN button
or TUNE− button
9
.
to confirm the selection .
3
repeatedly until Time setup
8
to confirm the selection .
3
until Set 12/24 hour appears
8
to confirm the selection .
3
to switch between the 12 hour
8
to confirm the selection .
3
or TUNE− button
9
.
to confirm the selection .
3
repeatedly until Time setup
8
to confirm the selection .
3
until Auto Update appears on
8
to switch
3
1
, until
8
, until
8
SBDB 5 A1