9.3.3 Changing the Sample ID
1.
Press <Menu> and select "Sample-ID > Edit ID".
2.
Select the ID you want to change and press <OK>.
3.
For changing the sample ID, see Chapter 9.3.3; for allocating an RFID tag, see
Chapter 9.5.2; for programming an RFID tag, see Chapter 9.5.3.
9.3.4 Deleting a Sample ID
1.
Press <Menu> and select "Sample-ID > Edit ID".
2.
Select the sample ID you want to delete and press
3.
Select <Delete selected ID>.
4.
Press <Delete> when asked if you really want to delete the selected ID.
The selected ID is deleted.
9.3.5 Deleting all Sample IDs
1.
Press <Menu> and select "Sample-ID > Edit ID".
2.
Select any sample ID and press
3.
Select <Delete all IDs>.
4.
Press <Delete> when asked if you really want to delete all IDs.
All IDs are deleted.
9.3.6 Selecting a Sample ID
1.
Press <Menu> and select "Sample-ID > Select ID".
All saved sample IDs are displayed.
2.
Select the required sample ID and press <OK>.
The sample ID is now selected and all measurements are given this ID. The
sample ID is shown on the main screen.
C96IB01
.
.
EN
41