5.
Open the method list on your PC using a text editor and enter additional
methods in the same format at will.
6.
Save your changes.
7.
Press <Menu> and select "Setup > Import / Export > Receive from PC".
8.
Hold the IrDA interface of DMA 35 to the IrDA interface of your PC to again
establish communication between the two instruments.
9.
On your PC, right click on the file you want to transmit and select "Send to > A
nearby computer".
The method list is sent to DMA 35 and automatically accepted.
9.2.3 Editing a Method
1.
Press <Menu> and choose "Methods > Edit Method".
2.
Select the method you want to edit and press <OK>.
3.
For changing a method name, see Chapter 9.2.1; for allocating an RFID tag, see
Chapter 9.5.2; for programming an RFID tag, see Chapter 9.5.3.
9.2.4 Deleting a Method
1.
Press <Menu> and select "Methods > Edit Method".
2.
Select the method to be deleted and press
3.
Select <Delete Selected>.
4.
Press <Delete> when asked if you really want to delete the method.
The selected method is deleted from the method list.
9.2.5 Deleting all Methods
1.
Press <Menu> and choose "Methods > Edit Method".
2.
Select a method and press
3.
Select <Delete all>.
4.
Press <Delete> when asked if you really want to delete all methods.
All methods are deleted.
C96IB01
.
.
EN
37