Selecting The Measuring Unit - Anton Paar DMA 35 Betriebsanleitung

EN
• Make sure to carefully clean the instrument after each measurement series to
avoid deposits in the measuring cell.
• Make sure that suitable solvents for cleaning are available.
TIP Your filled sample is continuously measured and the measuring result is
displayed. By storing the measuring result, you can print it or export it to a
PC later.
9.1

Selecting the Measuring Unit

For measuring your samples you can choose between a number of predefined
measuring units or you can import custom functions into the instrument and select one
of them as the measuring unit. Contact your Anton Paar representative to obtain a
custom function from Anton Paar.
All measuring units are derived from the density of the sample at the measured
temperature.
1. Press <Menu> and select "Measuring Units".
The list of the predefined measuring units is displayed.
2. Select the preferred measuring unit and press <OK>.
Some measuring units contain subitems with options to be selected.
3. Select the preferred option and press <OK>.
The measuring unit has now been changed.
30 C96IB01