8.5
Backlight
The LC display and the oscillator are equipped with a backlight. The backlight ensures
that even under bad lighting conditions the measuring results and menu options are
easily readable. The backlight of the oscillator enables you to observe the filling
process.
You can choose between "Auto", "Off" and "On":
Auto
The backlight automatically turns on when a key is pressed. The
backlight also turns on automatically if the instrument recognizes
that a new sample is being filled into the measuring cell. To activate
the backlight without accessing the menu, press an arrow key. The
backlight switches off automatically after 30 seconds.
Off
The backlight is permanently off.
On
The backlight is permanently on.
TIP
Having the backlight turned on permanently will shorten battery life.
1.
Press <Menu> and select "Setup > Backlight".
2.
Select the preferred setting (Auto, Off, On) and press <Save>.
8.6
Contrast Settings
The display contrast can be freely adjusted to suit your preference.
1.
Press <Menu> and select "Setup > Display Contrast".
2.
Select the preferred setting (-8 to +8) and press <Save>.
C96IB01
EN
25