Inhaltsverzeichnis
Werbung
• Prevention
of an obstacle
to Radio
receivers
This monitor
has been designed
pursuant
to the FCC class B Rules (see page VII). This is to
prevent
a problem
to Radio receivers.
If this monitor
cause
a problem
to Radio receivers,
then take the thllowing
steps:
- Keep the monitor
away from Radio.
- Adjust Radio antennas
in order for the monitor
not to receive
interference.
- The antenna
cable of Radio should be kept away from the monitor.
- Use a coaxial
cable thr antenna.
You can check if this monitor
influences
Radio receivers
by turning
off all other equipment
other than the monitor.
If you find a problem
receiving
Radio when using the monitor,
check the instructions
mentioned
above.
• Precautions
for the
monitor
- Confirna the connector
is fixed tightly
when the signal cable is connected.
Also confirm
the screws
on the connector
are tightened.
- Plug the power
cord of the monitor
into a different
socket from that for other equipment,
such as Radio etc..
- Use a plug with ground terminal
and make sure that it connects
to the ground.
• Precaution
during transportation
Please pay attention
when you transport
this monitor
because
it is heavy.
Furthermore,
use the original
carton
box and its packaging
materials
when the monitor
is
transported.
Failure
to transport
the monitor
in any carton
except the original
carton
may result
in damage
to the monitor.
Save the original
carton
box and all packing
material.
Werbung
Inhaltsverzeichnis
