Hitachi PD1 Handbuch Seite 65

• RGB terminal (D-sub 15-pin connector)
Pin Input signal
1 R. video
2 G. video or sync on green
3 B. video
4 No connection
5 No connection
6 R.GND
7 G.GND
8 B.GND
9 NO connection
10 GND
11 No connection
12 [SDA]
13 H. sync or HA/composite sync
14 V.sync. [V.CLK]
15 [SCL]
• RGB terminal (BNC connector)
© © ©
V.sync. H. sync or H/V B. video
composite sync
• When differem kinds of input signals are
simultaneously input to the monitor via a
graphics board or the like, the monitor
will automatically select the signals in the
tbllowing priority order:
Sync signal type Priority
H/V separate sync. 1
H/V composile sync. 2
sync.on Green * 3
• Even in the case oftbe recommended signals
shown on the fbllowing page, there may be
instances when correct display is not possible.
In this case, use HTV separate sync, HTV
composite sync.
@ ©
G. video or sync R. video
on green
• S-input connector pin specifications
Pin Input signal
1 Y
2 Y-GND
3 C
4 C-GND
Frame GND
• Serial connector pin specifications
Pin Input signal Remarks
1 NO connection
2 RXD Unit _ PC
3 TXD Unit _ PC
4 NO connection
5 GND Unil GND _ PC GND
6 No connection
7 No connection
8 No connection
9 No connection