Hitachi PD1 Handbuch Seite 59

• When the RGB input is selected
• When this unit is connected to a VESA DPMS computer, the Power Save (Of D mode can
be set to be activated automatically when the computer is not being used to reduce power
consumption by this unit.
Horizontal
RGB sync sfgnN
Vertical
Video signal
Operation mode
indicating lamp
Power consumption
Yes
Yes
Active
(normaJ display)
On
Lights green
360W
(Sound off)
No Yes
Yes No
Blank (no video)
Off
BJinks green
5W or less
No
No
• When the Video Input is selected
T
• When there is no video signal input, the power-saving system operates to reduce the power
consumed by the sunit.
Video signal Yes No
Screen display Active (normal display) Blank (no video)
Operation mode On Off
Indicating lamp Lights green Blinks green
Power consumption 360W (Sound off) 5W or less
• if you press the MENU button while the monitor has power save mode turned of'l;
sound output is enabled by cancelling the off setting of power save mode.
• When the monitor enters sound mode, it displays a
mode indication on the screen.
• In sound mode, sound volume can be adjusted.
• Press the MENU button to cancel sound mode.
• Power save mode is enabled when sound mode is
canceled.
• If an input signal is available, the monitor displays the
input signal by canceling sound mode automatically.
Remote
controEler
SOUND MODE
MEN
%
Remote
controller POWER SAVE
MEN
%