Introduction - Cameo EVOS S3 Bedienungsanleitung

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
The housing surface of the spotlight can heat up to temperatures as high as 70 °C in regular use. Ensure that it is not possible
to come into contact with the housing unintentionally. Always allow sufficient time for the lamp to cool down before
dismantling, carrying out maintenance work or charging etc.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
Caution! Intense LED light source! Risk of eye damage. Do not look into the light source.
CAUTION! IMPORTANT INFORMATION ABOUT LIGHTING PRODUCTS!
1. The product has been developed for professional use in the field of event technology and is not suitable as household lighting.
2. Do not stare, even temporarily, directly into the light beam.
3. Do not look at the beam directly with optical instruments such as magnifiers.
4. Stroboscope effects may cause epileptic seizures in sensitive people! People with epilepsy should definitely avoid places where
strobes are used.

INTRODUCTION

MOVING HEAD EVOS S3
®
CLES3
CONTROL FUNCTIONS
22-channel and 32-channel DMX control
Art-Net
sACN
W-DMX™
RDM enabled
Master/Slave operation
Standalone functions
FEATURES
350W LED. CMY + CTO colour mixing. Colour wheel with 7 brilliant colours and split colours. 8 fixed gobos and 7 rotating gobos. Rotating
prism. Frost-Filter. Iris. Focusing and zooming via DMX. Strobe. Pan and tilt motors with 16-bit resolution. Automatic position correction.
Heatpipe cooling plus temperature controlled fans. 3- and 5-pin DMX connections. TRUE1 compatible mains connector. 2 x Omega mounting
brackets included. Operating voltage 100–240V AC. Power consumption 460W
The spotlight features the RDM standard (remote device management). Remote device management allows the user to view status and
configuration of RDM terminals via an RDM-capable controller.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.