Cameo EVOS S3 Bedienungsanleitung Seite 8

CONFIGURING DMX MODE (DMX Mode)
Press MENU to access the selection menu. Using the UP  and DOWN  control buttons, select the menu item "DMX Mode" (observe
arrow) and confirm with ENTER. In the sub menu, you can now select under the DMX operating modes "32CH" and "22CH" using the UP 
and DOWN  buttons. Confirm your selection with ENTER. Tables with the channel assignments can be found in these instructions under
DMX CONTROL.
---------------- Menu ----------------
DMX Address
DMX Mode

Stand Alone
Slave
Settings
Network Settings
System Info
CONFIGURING STANDALONE MODE
Press MENU to access the selection menu. Using the UP  and DOWN  control buttons, select the menu item "Stand Alone" (observe
arrow) and confirm with ENTER. Now use the control buttons UP  and DOWN  to select the desired stand-alone mode ("Auto Program"
or "Static", note arrow) and confirm with ENTER.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone

Slave
Settings
Network Settings
System Info
AUTO MODE (programme 1 to programme 12)
The 12 different auto-programmes each comprise non-editable colour-change sequences. Brightness and speed are independently
adjustable. Select "Auto Program" as described under "CONFIGURE STANDALONE MODE" and press ENTER to confirm. Now use the control
buttons UP  and DOWN  to select one of the 12 auto programmes (observe arrow) and confirm with ENTER. To set the running speed,
select the menu item "Speed", confirm with ENTER and set the desired value between 000 to 100 using the UP  and DOWN  control
buttons. Confirm by pressing ENTER. To adjust the brightness, select the menu item "Intensity", confirm with ENTER, select the desired
value from 000 to 100 and confirm with ENTER. Press MENU four times to return to the main display (Mode Auto).
----------- Stand Alone -----------
Auto Programme

Static
8
------------ DMX Mode ------------
32CH

22CH
------------ Stand Alone ------------
Auto Programme

Static
---------- Auto Programme
----------
Program 1

Program 2
-
Program 11
Program 12
------------- Program x -------------
Speed <100>

Intensity <100>
Intensity
Speed
000 000
- -
100 100
40°C
Mode
Auto