Dmx Mode - Cameo EVOS S3 Bedienungsanleitung

Auto Programme 000
006
027
048
069
090
111
132
153
174
195
216
237
Pan/Tilt Macro 000
006
041
076
111
146
181
216
Pan/Tilt Speed / 000
Auto Programme
Speed
SET SLAVE MODE (Slave)
Press MENU to access the selection menu. Using the UP  and DOWN  control buttons, select the
menu item "Slave" (observe arrow) and confirm with ENTER. Connect the slave and the master units (same model) using a DMX cable, and
enable one of the stand alone modes on the master unit (AUTO, Static). Now the slave unit will follow the master unit. If there is no control
signal, the display characters will flash. Flashing stops as soon as a control signal is present.
---------------- Menu ----------------
DMX Address

DMX Mode

Stand Alone
Slave

Settings
Network Settings
System Info
DEVICE SETTINGS (Settings)
Press MODE to access the selection menu. Using the  and DOWN  controls, select the menu item "Settings" (observe arrow) and
confirm with ENTER.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings

Network Settings
System Info
12
– 005 Auto Programme off
– 026 Auto Program 1
– 047 Auto Program 2
– 068 Auto Program 3
– 089 Auto Program 4
– 110 Auto Program 5
– 131 Auto Program 6
– 152 Auto Program 7
– 173 Auto Program 8
– 194 Auto Program 9
– 215 Auto Program 10
– 236 Auto Program 11
– 255 Auto Program 12
– 005 off
– 040 PAN small > big
– 075 TILT small > big
– 110 PAN/TILT small > big
– 145 PAN/TILT (inverse) small > big
– 180 Circle small > big
– 215 Circle (inverse) small > big
– 255 Random small > big
– 255 Pan/Tilt Fast -> Slow
40°C
Mode
Slave