Introduction; Connections - Cameo DURA SPOT Bedienungsanleitung

INTRODUCTION

DURA SPOT OUTDOOR INSTALLATION SPOTLIGHT IP67
CLDS60 with 3 x 20 W 4in1 RGBW LEDs
CLDS100 with 6 x 20 W 4in1 RGBW LEDs
CLDS200 with 12 x 20 W 4in1 RGBW LEDs
CLDS400 with 20 x 20 W 4in1 RGBW LEDs
CONTROL FUNCTIONS
• 1-channel, 2-channel Preset, 2-channel CCT, 3-channel RGB, 4-channel RGBW, 6-channel
Direct and 10-channel full access DMX control
• RDM
• Control via remote unit CL UNICON (optionally available)
• Master/slave modes
• Standalone functions
FEATURES
• Protection class IP67
• Impact resistance rating IK08.
• Convection cooling
• Operating voltage 100 - 277 V AC
The spotlights feature the RDM standard (remote device management). This remote device ma-
nagement enables the status query and configuration of RDM end devices via an RDM-capable
controller, such as the optionally available Cameo UNICON (item number CLIREMOTE). The Cameo
UNICON also allows access to the entire fixture menu.

CONNECTIONS

HAZARD!
Connecting cables to the headlamp requires detailed expertise and may only be car-
ried out by specially trained persons! If you do not have this qualification, do not try
to connect cables yourself, but use the help of professional companies! Before wiring
the headlamp, make sure that the power supply intended for connection is not live!
The connections must comply with a water tightness of at least protection class IP67!
The manufacturer shall not be liable for any damage to property or personal injury
caused by improper handling.
11