Angle Grinder - Hilti AG 125-A36 Bedienungsanleitung

Item Equipment
G Clamping nut
H Clamping flange
‚Kwik lock' (optional for
I
G)
3.9 Li-ion battery charge status display
The charge status of the Li­ion battery is displayed after one of the two battery release buttons is pressed.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights up.
1 LED blinks.
Note
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs blink, please refer to the information given in the
Troubleshooting section.
4 Technical data

4.1 Angle grinder

Rated voltage
Rated speed
Maximum disc diameter
Weight in accordance with EPTA proce-
dure 01/2003
Drive spindle thread (arbor size)
Spindle length
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one electric tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values determined in accordance with EN 60745
Emission sound pressure level (L
Uncertainty for the sound pressure level
(K )
pA
Sound (power) level (L
Uncertainty for the sound power level
(K )
WA
Printed: 14.09.2015 | Doc-Nr: PUB / 5246577 / 000 / 00
AC­D AG-D
X X
X X
X X
AG 125­A36
36 V
9,500 rpm
125 mm
3.5 kg
M14
22 mm
) 80 dB(A)
pA
3 dB(A)
) 91 dB(A)
WA
3 dB(A)
AF-D AN-D DG­CW
X X X
X X X
X X ­
Meaning
• Charge status: 75 % to 100 %
• Charge status: 50 % to 75 %
• Charge status: 25 % to 50 %
• Charge status: 10 % to 25 %
• Charge status: < 10 %
AG 150­A36
36 V
8,500 rpm
150 mm
3.5 kg
M14
22 mm
DC­D DD-M14
X ­
X ­
X ­
25