Technical Data; Angle Grinder - Hilti AG 230-27DB Original Bedienungsanleitung

If the motor is overloaded through application of excessive working pressure, the power tool's performance
drops noticeably or it may stall completely. A standstill should be avoided.
3.9 DC-EX 230/9" dust hood for cutting, with carriage (accessory)
The power tool may be used for cutting and slitting work on mineral materials only when fitted with a dust hood.
CAUTION Use of this hood for working on metal is prohibited.
3.10 Guard with cover plate (accessory)
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications,
use the guard with cover plate.
4 Consumables
Only synthetic resin-bonded, fiber-reinforced discs with a maximum diameter of Ø 230 mm which are
approved for use at a rotational speed of at least 6500/min and a peripheral speed of 80 m/s may be used.
Disc thickness must not exceed 8 mm.
WARNING! When cutting or slitting with abrasive cutting discs always use the guard with cover plate
or a fully enclosing dust hood.
Discs
Abrasive cutting disc
Diamond cutting disc
Abrasive grinding disc
Suitability of discs for the equipment used
Item Equipment
A Guard
B Guard with cover plate
C DC-EX 230/9" dust hood for cutting
D Side handle
E DC-BG 230/9" hoop grip (optional for D)
F Clamping nut
G Clamping flange
H Kwik lock (optional for F)

5 Technical data

5.1 Angle grinder

Note
For rated voltage, frequency, current and input power, please refer to the country-specific type
identification plate.
If the device is powered by a generator or transformer, the generator or transformer's power output must be
at least twice the rated input power shown on the type identification plate of the device. The operating voltage
of the transformer or generator must always be within +5% and -15% of the rated voltage of the device.
Rated speed
Maximum disc diameter
Thread diameter
Thread length
Weight in accordance with EPTA procedure 01
20 English
Printed: 26.09.2017 | Doc-Nr: PUB / 5376157 / 000 / 00
3
Application Designation
Cutting, slitting AC­D
Cutting, slitting DC­D
Rough grinding AG-D
2
Material
Metal
Mineral
metal
AC­D AG-D
- X
X -
­ ­
X X
X X
X X
X X
X X
AG 230-27DB
6,500 /min
230 mm
M14
22 mm
6.8 kg
DC­D
X
X
X
X
X
X
X
X