Cochlear Baha BP110 Power Bedienungsanleitung Seite 5

Using your sound processor
The sound processor is equipped with buttons for
turning the sound processor on or off, selecting
different listening programs and adjusting the
volume level. Audio and visual indicators can be
activated to alert you to the different settings and
processor status.
Your sound processor is programmed to be used
specifically on either the right side or the left side
of your head.
On/off and indicators
See figure 2
Turn on your sound processor by pressing and
holding down the middle button until the visual
indicator flashes 3 times. To turn off your sound
processor, press the middle button and hold it
down for 2 seconds.
If the sound processor is turned off and then
turned on again within 15 minutes, it returns to the
last used program and volume level.
If the sound processor is turned off for longer
than 15 minutes, or if the battery is changed or
removed, it will return to the default program and
volume (as set by your hearing care professional)
when it is turned on again.
Audible and visual status indicators
See figure 3
Your sound processor is equipped with audible
and visual status indicators
These provide a simple and effective means of
monitoring the status of the sound processor, and
they are especially useful for caregivers to ensure
that their child's sound processor is working at all
times.
When you turn on your processor, the visible
indicators flash. If they flash orange,
sound processor is configured for the right side
of your head. If they flash blue,
processor is for the left side. If you are a bilateral
user, make sure your processor is used on the
correct side.
(beeps and LEDs).
1
your
2
your sound
3
Note: Your hearing care professional has the
ability to disable the flashing indicators and
beeps, if desired. However, the orange and blue
indicators at startup cannot be disabled.
If your sound
processor flashes
Orange
Blue
Changing the program
Your hearing care professional has, in discussion
with you, selected up to three programs for your
Baha sound processor:
Program 1:
Program 2:
Program 3:
(These programs are suitable for different listening
environments. Ask your audiologist to fill in your
specific programs).
To switch programs, quickly press and release the
middle button. Audio and visual signals let you
know which program you have switched to:
Program : 1 beep/flash
1
Program : 2 beeps/flashes
2
Program : 3 beeps/flashes
3
1
2
3
English
Then it is configured
for use on the
Right side
Left side
See figure 4
5