Attaching The Battery Adaptor Using The Attachement - Sony BKP-L551 Installationsanleitung

Attaching the Battery Adaptor Using the Attachment
By screwing the attachment (supplied as an assembly)
to the camera adaptor, the battery adaptor can be fit to
the attachment instead of screwed directly to the
camera adaptor. This method simplifies fitting and
1
Remove the caps from the
screw holes on the camera
adaptor rear surface. Take out
the hexagonal wrench stored in
the battery adaptor.
See steps 1 and 2 in the previous
section "Screwing the Battery
Adaptor".
2
Separate the attachment
assembly.
3
Using the M4 × 16 screws,
attach the battery spacer
(supplied with the camera
adaptor) and attachment A to
the camera adaptor.
removal of the battery adaptor.
A battery case DC-300/310 can also be fit to the
attachment.
Attachment A
Attachment B
Projection
Lever
1 Press the lever on the
attachment A to the right
and depress the projection
with holding the lever.
Battery spacer
Attachment A
M4 × 16 screws
2 Slide attachment B out
while holding the
projection.
(continued)
5(E)