Burner Info - Dibo GreenBoiler serie Handbuch

E N
B u R n E R
1 burner nozzle

BURNER INFO

The burner depends on the type. The 'green burner' is a burner that makes a
higher efficiency. The burner provides hot water. The temperature of the water
is adjustable. The burner is double walled. The outside wall is air cooled by the
ventilator lateral on the burner chamber. on top of the burner one can find the
burner mouth. The water supply and outlet are both situated at the bottom of
the burner.
‘
Lime scale deposits while working at higher temperatures
The hardness of the water is possible expressed in French degrees (°F) or
German degrees (°D). The difference is noticeable in the following equation:
1 ° F = 0.56 ° D. For example, water having a hardness of 40 ° F has a German
hardness of 40 x 0.56 = 22.4 ° D. See the in your area prescribed hardness of
drinking water. hard water can cause problems by means of limescale from
30°F or 17°D. When hardened water is now warmed / heated / or being pumped
(or when hard water comes in contact with air), this can cause calcification.
hard water is caused mainly by the presence of two components: calcium
and magnesium. So the harder the water, the more chances on lime scale!
When cleaning with high temperatures (or at using heated water) , you obtain
thus faster calcification in case of a low hardness! This can therefore result in
loss of energy efficiency, higher energy consumption and reduced capacity
of water supply (including calcium deposits on the burner coil and other water
connection parts).
We, DIBo nV, therefore recommend to decalcify the machines with a burner
preventive additionally and after use of hot water rinse adequate with cold
water (if possible) to ensure optimum performance of the machine! It's
preventively reccomended to provide a softener system (or descaling system)
in your installation. as possible after treatment, we advise to use an external
descaling pump 230V (1.273.100).
DiBO 18
1