Technical Info; General; General Data; Accessories - Dibo ECN serie Bedienungsanleitung

E N
T E C h n I C a l I n F o

Technical info

GENERAL

In this chapter you find the most important technical data of the range where
your machine belongs. Machine statement See end of book "Technical
data"on page 24 .

GENERAL DATA

• Maximum reactive force of the sprinklers: <60n
• Minimum water pressure (at LP entrance): 200 kpa (2 bar)
• Maximum water pressure (at LP entrance): 300 kpa (3 bar)
• Minimum water temperature: 1 °C
• Maximum water temperature: see "Technical data"on page 24 "
• Sufficient water supply at drinking water quality (Directive 98/83/EG)
• The use of an extra water filter is recommended

ACCESSORIES

1 x user manual

VIBRATION MEASUREMENT (HAND/ARM) - ROTATING HEAD

as previously mentioned, when using the rotating head of the cleaner (note: not
all cleaners have a lance with rotating head), the action values will be reached
sooner. Below, a table is mentioned with the vibration intensity and exposure
time (in hours) of the lances with rotating head on a weekly basis.
The measurements were carried out in the capacity of an accredited laboratory.
This measurements were carried out according to the Royal Decree of 7 July
2005 and En-ISo 5349:1.
TYPE
ECn-M 110/13
ECn-M 160/16
ECn-M/T 160/22
ECn-M/T 160/30
ECn-M 220/16
ECn-M/T 220/22
ECn-T 220/30
ECn-M 260/16
ECn-T 260/22
ECn-T 320/18
‘
Note: the version with reel reduces the vibration exposure time.
Increasing the water temperature (for ex.: through the
hotbox) does not raises the vibration exposure time.
DiBO 22
EXPOSURE
VIBRATION
TIME (ACTION)
INTENSITY
ON WEEKLY
(AEQSUM)
BASE
6.0 m/s² 7 h
0.3 m/s² + 40 h
9.3 m/s² 2.52 h
5.5 m/s²
8.20 h
8.9 m/s² 3.1 h
10 m/s² 2.3 h
5.6 m/s² 8.04 h
8.9 m/s² 3.1 h
9.8 m/s² 2.5 h
0.3 m/s² + 40 h
EXPOSURE
TIME (LIMIT) ON
WEEKLY BASE
28 h
+ 40 h
11.31 h
33 h
12.42 h
10 h
32 h
12.42 h
10.11 h
+ 40 h