Specifications; Product Identification; Engine; Mower - Jacobsen R311T-T4I Sicherheits-, Betriebs- Und Wartungshandbuch

2

SPECIFICATIONS

2 SPECIFICATIONS
2.1

PRODUCT IDENTIFICATION _________________________________________________

69177 .............................. R311T-T4I with folding ROPS.
Serial Number ................ An identification plate, like the one
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
2.2

ENGINE__________________________________________________________________

Make ............................... Kubota
Model .............................. V2403-M-T-E3B
Horsepower .................... 59 hp (44 kW) @2600 rpm
Note: Actual sustained horsepower will likely be lower
than listed in specifications due to operating limitations
and environmental factors
Displacement .................. 148 cu. in. (2434 cc)
Bore and Stroke .............. 3.43 x 4.03 in. (8.7 x 10.24 cm)
Compression Ration ....... 23.8:1
Torque ............................. 120.7 ft. lbs. (163.6 Nm) @ 1800
Fuel:
Type .......................... No. 2 Low or Ultra Low Sulfur
Rating ....................... Min. Cetane rating 45
Capacity.................... 20 U.S. Gal. (75.7 liters)
2.3

MOWER _________________________________________________________________

Tires:
Front ......................... 26 x 12-12, 6 Ply
Rear .......................... 23 x 10.5-12, 4 Ply
Pressure:
Front ......................... 16-20 psi (1.10-1.38 BAR)
Rear .......................... 12-14 psi (0.83-0.97 BAR)
Battery:
Type .......................... 12 Volt Lead/Acid
Group ........................ AABM #75NF
Rating ....................... 750 CCA at 0° F (-18° C)
Service Brake ................. Dynamic braking through traction
Parking Brake ................. Integrated in wheel motor,
en-8
shown, listing the serial number, is
attached to the frame of the
mower near the center lift arm
mount.
rpm
Diesel
circuit.
hydraulic release
PRODUCT OF U.S.A.
1855
kg
69177001651
Fuel Injection Pump........ Bosch K type Mini Pump
Ignition Timing ................ 19° before TC
Governor......................... Centrifugal ball mechanical
Low Idle ................... 900 RPM
High Idle ................... 2850 RPM
Lubrication:
Capacity.................... 10 quarts (9.5 liter) with filter
Type.......................... 10W30
API Classification ..... CJ-4
Air Filter .......................... Dual element dry type with
Alternator ........................ 45 amp
Cooling System .............. Liquid Cooled
Capacity...................... 8 qt. (7.6 l) 50/50 water / ethylene
Thermostat ............... 185° F (95° C)
Speed:
Forward (2WD) ........ 0 - 14.9 mph (0 - 24.0 km/h)
Forward (4WD) ......... 0 - 7.8 mph (0 - 12.5 km/h)
Mow .......................... 0 - 7.7 mph (0 - 12.4 km/h)
Reverse .................... 0 - 6 mph (0 - 9.6 km/h)
Hydraulic System:
Capacity.......................... 17 U.S. gal. (64.3 liters)
Fluid Type ....................... 10W30
Return Filter.................... Full Flow 10 micron
Charge Filter................... Full Flow 10 micron
Steering ......................... Power steering, rear wheels
Mower Lift ....................... 3 spool manual valve and single
PTO Drive....................... Fixed Flow Hydraulic
® 11524 WILMAR BLVD,
CHARLOTTE, NC 28273
A Textron Company
1-800-848-1636 (US)
44 XXXX
kW
evacuator valve and service
indicator
glycol mix
acting cylinders