Herunterladen Inhalt Inhalt Diese Seite drucken

Step Cutting - Jacobsen R311T-T4I Sicherheits-, Betriebs- Und Wartungshandbuch

Sichelmäher mit überrollfaltbügel (rops)
Vorschau ausblenden Andere Handbücher für R311T-T4I:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10.3 STEP CUTTING____________________________________________________________

NOTE: Arrow indicates direction of travel.
Probable Cause
HOC (height-of-cut) settings are different from one side of a
deck to the other or from one deck to another.
Worn deck caster wheel bearings or fork bushings.
Tire pressure uneven.
Step cutting occurs when grass is cut taller on one side of
a deck than the other. This is usually caused by
mechanical wear or deck caster adjustment.
TN0221
Check HOC adjustment of decks. (Refer to Section 8.11.)
Check/replace deck caster wheel bearings and fork bushings.
Check/adjust proper tire inflation pressure. (Refer to Section 7.17.)
QUALITY OF CUT
Remedy
10
en-57

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis