Streaks - Jacobsen R311T-T4I Sicherheits-, Betriebs- Und Wartungshandbuch

10 QUALITY OF CUT

10.6 STREAKS ________________________________________________________________

NOTE: Arrow indicates direction of travel.
Probable Cause
Damaged blade(s).
Turning too aggressively. Cutting units don't overlap during turns
or on side hills.
Tire mats down grass before it is cut.
Blades installed incorrectly.
en-60
A streak is a line of uncut grass. This is usually caused by
a damaged blade.
TN0224
Replace blade(s).
Turn less aggressively to allow cutting units to overlap. Change
mowing direction or pattern on side hills.
Install high lift blades.
Check for proper clockwise/counter-clockwise blade installation.
Remedy