Display Menu; Digital I/O Menu; Alarms Menu - Videotec ULISSE IR360 Bedienungsanleitung

9.6.8 Display menu

01. Actual Position: If not on Off, it is used to select
how the Pan, Tilt, Zoom, Focus and Iris positions
are displayed on the screen.
02. Preset Name: If not on Off, it is used to select
how the text associated with the last-reached
Preset position is displayed on the screen. It is
possibile to select timed (1 S, 3 S and 5 S) or a
constant (Const) display.
03. Pan & Tilt ID: If not on Off, it shows the ID of the
pan & tilt.
04. Alarms: When not switched to Off, this selects
the view mode for alarm related texts. It is
possible to select a timed view mode (1 S, 3 S
and 5 S) or constant view mode (Const).
05. Received Commands: If enabled, it shows the
received serial commands.
06. Horizontal Delta: Modifies the horizontal
position of the menu texts.
07. Vertical Delta: Modifies the vertical position of
the menu texts.
08. Video Signal: Type of video signal.
DISPLAY
------------------------
1 ACTUAL POSITION :
2 PRESET NAME
3 UNIT ID
4 ALARMS
5 RECEIVED COMMAND:
6 HORIZONTAL DELTA:
7 VERTICAL DELTA
8 VIDEO SIGNAL
Fig. 113
This is a dynamic self-configuration menu based on
the Pan & Tilt model.
48

9.6.9 Digital I/O Menu

01. Alarms: Allows access to the Alarms menu.
02. Washer: Allows access to the Washer menu.
Fig. 114

9.6.9.1 Alarms menu

01-04. Alarms 1-4: Allow access to the menus from
05.
ON
: 5 S
: ON
: ON
ON
35
: 10
: PAL
Fig. 115
This is a dynamic self-configuration menu based on
the Pan & Tilt model.
From the Alarms menu it is possible to access one of
the menus (Alarms 1-4) to edit the alarms parameters.
DIGITAL I/O
------------------------
1>ALARMS
2 WASHER
which it is possible to set the parameters of
Alarms 1 to 4.
Alarms State: Allows access to the Alarms
State menu.
ALARMS
------------------------
1>ALARM 1
2 ALARM 2
3 ALARM 3
4 ALARM 4
5 ALARMS STATE
>
>
>
>
>
>
>