Safety Signs; Main Components - GGP ITALY MP2 504 Series Gebrauchsanweisung

persons and/or damage things. Examples of
improper use may include, but are not limited to:
– Allowing children, animals or other passengers to
ride on the machine as they could fall off and injure
themselves or compromise safe driving by the operator;
– Letting oneself be transported by the machine;
– Using the machine to tow or push loads;
– Using the cutting means on surfaces other than grass;
– Using the machine for leaf or debris collection;
– Using the machine to trim hedges, or for
cutting vegetation other than grass;
– Use of the machine by more than one person.
IMPORTANT Improper use of the machine will
invalidate the warranty, relieve the Manufacturer from
all liability, and the user will consequently be liable for
all and any damage or injury to himself or others.
3.1.3 User types
This machine is intended for use by consumers,
i.e. non-professional operators. The machine
is intended for "DIY" use only.
IMPORTANT The machine must be used by one operator.
3.2

SAFETY SIGNS

The machine has various symbols on it (fig. 2). They are
used to remind the operator of the behaviour to follow
to use it with the necessary attention and caution.
Meaning of symbols:
Warning! Read the instructions
before operating the machine.
Warning! Do not put hands or feet
near or under the opening of the cutting
means. Disconnect the spark plug cap
and read the instructions before carrying
out any maintenance or repairs.
Danger! Keep all persons away from
the work area whilst working..
Danger! Do not put hands or feet near or
under the opening of the cutting means.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised service centre.
3.3 IDENTIFICATION LABEL
The identification label holds the following data (fig. 1):
1. Sound power level
2. CE conformity marking
3. Year of manufacture
4. Type of lawnmower
5. Serial number
6. Name and address of Manufacturer
7. Article code
Engine rated power and maximum operating speed
8.
9. Weight in Kg
Write the identification data of the machine in the specific
space on the label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an authorized service workshop.
IMPORTANT The example of the Declaration of
Conformity is provided on the last pages of the manual.
3.4

MAIN COMPONENTS

The machine is composed of a series of main
components that have the following functions (fig.1):
A. Chassis: this is the casing that houses
the rotating cutting means.
B. Engine: the driving force for the
cutting means and wheel drive.
C. Cutting means: the element designed to cut the grass.
D. Rear discharge guard: it is a safety device which
prevents objects drawn up by the cutting means
from being hurled away from the machine.
E. Rear discharge chute: as well as discharging
the grass cuttings onto the ground at the back,
this is also a safety element that stops any
object drawn up by the cutting means from
being hurled away from the machine
F. Side discharge guard (if provided): it is a safety
device which prevents objects drawn up by the
blade from being hurled away from the machine.
G. Side discharge chute (if provided): as well as
discharging the grass cuttings onto the ground
at the side, this is also a safety element that
stops any objects drawn up by the cutting means
from being hurled away from the machine.
H. Grass catcher: as well as collecting the grass
cuttings, this is also a safety element that stops
any objects drawn up by the cutting means
from being hurled away from the machine.
I. Handle: this is the operator's work station. It is long
enough to ensure the operator remains at a safe
distance from the rotary cutting means whilst working.
J. Engine brake lever / cutting means: the
lever that allows you to switch the engine
on and off whilst simultaneously engaging
and disengaging the cutting means.
K. Drive lever: the lever that engages the wheel
drive and allows the machine to move forward.
4. ASSEMBLY
The safety regulations to follow are
described in chap. 2. Strictly comply with these
instructions to avoid serious risks or hazards.
For storage and transport purposes, some components of
the machine may not be installed in the factory and have to
be assembled after unpacking. Follow the instructions below.
Unpacking and completing the assembly should
be done on a flat and stable surface, with enough
space for machine handling and its packaging,
always making use of suitable equipment. Do not
EN - 4