Herunterladen Inhalt Inhalt Diese Seite drucken

During Operation - GGP ITALY MP2 504 Series Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 83
• Never allow children or persons unfamiliar with 
these instructions to use the machine. Local 
regulations may restrict the age of the operator.
• Never use the machine if the user is tired or unwell, or has 
taken medicine, drugs, alcohol or any substances which 
may slow his reflexes and compromise his judgement.
• Do not allow children or other passengers 
to ride on the machine.
• Bear in mind that the operator or user is responsible 
for accidents or unexpected events occurring to other
people or their properties. It is the user's responsibility 
to assess the potential risk of the area where work is to 
be carried out, and to take all the necessary precautions 
to ensure his own safety and that of others, particularly 
on slopes or rough, slippery and unstable ground.
• If the machine is sold or lent to others, make 
sure that the operator looks over the user 
instructions contained in this manual.
2.2
PREPARATION
Personal Protective Equipment (PPE)
• Always wear suitable work attire, hard-wearing safety 
footwear with non-slip soles and long trousers. Do 
not operate the machine when barefoot or wearing 
open sandals. Wear hearing protection devices.
• Never wear scarves, shirts, necklaces, bracelets, 
clothing with flowing parts, laces or ties or any hanging 
or flapping accessory that could catch in the machine 
or in any objects or materials in the work area. 
• Tie your hair back if it is long.
Work area/Machine
• Thoroughly inspect the entire work area and 
remove anything that could be thrown by the 
machine or damage the cutting means/rotating 
units (stones, branches, iron wire, bones, etc.).
Internal combustion engines: fuel
DANGER! The fuel is highly flammable.
• Keep the fuel in approved containers, in a safe place, 
away from any naked lights or heat sources.
• Keep the containers free of grass cuttings, 
leaves, or excessive grease.
• Keep the containers out of the reach of children.
• Do not smoke when filling up with fuel 
or when handling the fuel.
• Use a funnel to top up with fuel only in the open air.
• Do not inhale fuel fumes.
• Never remove the tank cap or add fuel while the 
engine is running or when the engine is hot.
• Open the fuel tank slowly to allow the 
pressure inside to decrease gradually.
• Do not approach the tank opening with a 
naked flame to check its contents.
• If you have spilled some fuel, do not attempt to start the 
engine but move the machine away from the area of 
spillage and avoid creating any source of ignition until the 
fuel has evaporated and fuel vapours have dissipated.
• Immediately clean up all traces of fuel spilt 
on the machine or on the ground.
• Replace caps of all fuel tanks and containers securely.
• Never start the machine in the same place in which 
you refilled it with fuel; the engine must be started in 
an area at least 3 metres from where you refuelled.
• If fuel is spilt on clothing, change clothing 
before starting the engine.
2.3

DURING OPERATION

Work Area
• Do not operate the engine in a confined space 
where dangerous carbon monoxide fumes 
can develop. All starting operations have to be
effected in an open or well ventilated area. Always 
remember that exhaust gases are toxic.
• When starting up the machine, do not direct 
the silencer and therefore the exhaust
fumes towards flammable materials.
• Do not use the machine in environments at risk of 
explosion, in the presence of flammable liquids, gas or 
powder. Electrical contacts and mechanical friction can 
generate sparks that can ignite the powder or vapours.
• Work only in daylight or with good artificial 
light in good visibility conditions.
• Keep persons, children and animals away 
from the working area. Instruct another adult 
to supervise any children in the vicinity.
• Avoid working with wet grass, in the rain and when there 
is a risk of a thunderstorm, especially lightening.
• Pay careful attention to uneven ground (hills, dips), slopes, 
hidden hazards and obstacles than could limit visibility.
• Be very careful near ravines, ditches or embankments. 
The machine could overturn if a wheel slides 
over the edge or if the earth gives way.
• Always mow across a slope and never up and down 
it, being very careful when changing direction, 
making sure you have firm footage and that the 
wheels do not hit any obstacle (such as stones, 
branches, roots, etc.) that may cause the machine 
to slide sideways or make you lose control of it.
• Look out for traffic when using the machine near the road.
Behaviour
• Exercise caution when reversing or moving backwards. 
Look behind you to make sure there are no obstacles 
before and during operations in reverse gear.
• Never run, always walk.
• Do not allow the lawnmower to pull you along.
• Always keep hands and feet away from the cutting 
means, when starting and when using the machine.
• Attention: the cutting means will continue to 
rotate for a few seconds after disengagement 
or after you have switched off the engine.
• Keep away from the discharge opening.
• Disengage the cutting means:
– When moving between work areas
– When driving on grass free surfaces
• Disengage the cutting means, switch off the 
ending, disconnect the spark plug cap and 
remove the ignition key (if present):
– Whenever you leave the machine unattended
If something breaks or an accident occurs 
during work, turn off the engine immediately and 
move the machine away to prevent further damage; 
if an accident occurs with injuries or third parties 
are injured, carry out the first aid measures most 
suitable for the situation immediately and contact 
the medical authorities for any necessary health 
care. Carefully remove any debris which could cause 
damage or injury to persons or animals if ignored.
The noise and vibration levels shown in these 
instructions are the maximum levels for use of the 
EN - 2

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mp2 554 seriesMp2 504 roller seriesMp2 554 roller seriesMp2 504 serieMp2 554 serieMp2 504 roller serie ... Alle anzeigen

Inhaltsverzeichnis