Initial Start-Up; Disposal/Environmental Protection; Accessories - Parkside PWSR 1 A1 Originalbetriebsanleitung

• Do not use the equipment in the vicinity
of flammable liquids or gases.
Nonobservance will result in a risk of
fire or explosion.
• Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the
approval of the manufacturer.
• Follow the security tips of your high-
pressure washer.
• Do not use for cleaning windows.

Initial start-up

Caution: Make sure that the
technical data of the angled
spray pipe matches the tech-
nical data of the used pres-
sure washer! If disregarded,
there is a risk of injury!
Connection without adapter
1. Screw together both parts (1+2) of the
angled spray pipe.
2. To connect to the PARKSIDEpressure
washer, snap the bayonet mount into
the PARKSIDE-pressure washer's jet gun.
Connection with adapter
1. Attach the adapter (3) to the angled
spray pipe (2) and turn it through 90°
until it locks into place (bayonet fitting).
Screw the coupling nut of the angled
spray pipe (2) against the adapter (1).
2. Connect the spray gun (bayonet lo-
cking device) and screw the cap nut of
the adapter (3) against the spray gun.
Cleaning
Always remove the mains plug of
the pressure washer before wor-
king. Danger of electric shock..
• Clean the angled spray pipe with wa-
ter and dry it with a soft cloth.
• Do not use any cleaning agents.
Storage
Store the device in a frost-proof room.
Disposal/environmental
protection
• The device, accessories and packa-
ging should be properly recycled.
• Take the device to a recycling plant.
• Please contact our service centre for
more information.

Accessories

Accessories can be obtained at
www.grizzly-service.eu
If you have issues ordering, please use the
contact form. If you have any other ques-
tions, contact the „Service-Center".
GB IE
9