Panasonic AW-PH400E Bedienungsanleitung Seite 55

Installation
Separate the camera mounting plate, which was removed in step
plates.
p Separate the camera mounting plate into sub plate (A) and sub plate (B) by
loosening the clamping screw.
Follow the steps below to mount the camera mounting sub plates, which were separated in step , onto the camera body.
When the AW-E750, AW-E650 or AW-E350 is used as the camera
(1) Remove the screw attached to camera mounting sub plate (A), and use it to mount camera mounting sub plate (B) onto
the tripod mounting seat.
(2) Mount camera mounting sub plate (A) onto camera mounting sub plate (B).
When the AW-E655 is used as the camera
(1) Mount camera mounting sub plate (A) onto the tripod mounting seat using the 2 camera mounting screws.
p Be absolutely sure to use a screwdriver or other tool to tighten the 2 camera mounting screws so that the camera mounting
plate is secured firmly.
, into its 2 sub
54 (E)
Roll Unit AW-RL400
Clamping screw