Panasonic AW-PH400E Bedienungsanleitung Seite 33

Parts and their function
IRIS [AUTO/MANU/LOCK] button
Use this to select the method for adjusting the lens iris
of the cameras in the currently selected pan-tilt head
system.
Each time it is pressed, the setting is switched in the
sequence of AUTO, MANU and LOCK.
AUTO: The cameras automatically adjust the lens iris in
accordance with the light quantity, and the IRIS
button lamp lights.
MANU: The lens iris is adjusted manually using the IRIS
dial. At this setting, the IRIS button lamp is off.
LOCK: The lens iris is locked at the manually adjusted
setting. It does not move even when the () IRIS
dial is turned. In this status, the IRIS button lamp
flashes slowly.
While MANU or LOCK is selected, the IRIS button lamp
starts flashing quickly when the IRIS dial is turned: this
indicates that the lens iris cannot be controlled even
when the () IRIS dial is turned.
p The IRIS button on the control panel does not
work when the remote control box (WV-CB700A) is
connected to the control panel. Select AUTO or MANU
using the IRIS [AUTO/MAN] button on the WV-CB700A.
SD CARD slot
This slot is where the SD memory cards are inserted.
Only when the AW-PH400 is used as the pan-tilt head
is it possible to store the setting data of the pan-tilt head
and camera on the SD memory cards.
p When a pan-tilt head other than the AW-PH400 is used,
the setting data cannot be stored on the SD memory
cards.
 IRIS dial
The lens iris can be adjusted by turning this dial while the
( ) IRIS [AUTO/MANU/LOCK] button is set to MANU.
The iris is opened by turning the dial clockwise and
stopped down by turning it counterclockwise.
p The IRIS dial on the control panel does not work when
the remote control box (WV-CB700A) is connected to
the control panel. Adjust the iris using the IRIS control
on the WV-CB700A.
 ZOOM lever/FOCUS dial
Use the ZOOM lever to adjust the lens zoom. The
TELE (telephoto) and WIDE (wide angle) settings are
established by the direction in which the lever is tilted;
the zooming speed is adjusted by the angle to which the
lever is tilted.
The lens is focused using the FOCUS dial on the top of
the lever.
 PAN POSITION indicator
16 LEDs are used to display the position of the pan-tilt
head in the horizontal rotational direction for 200 degrees
to the left or right.
When the pan-tilt head is rotated to the right by more
than 180 degrees up to 200 degrees, the 180-degree
LED flashes, and LEDs on its left light.
Conversely, when the pan-tilt head is rotated to the left
by more than 180 degrees up to 200 degrees, the 180-
degree LED flashes, and LEDs on its right light.
90 ° to the left
180 ° to the left or right
 IRIS indicator
The position of the lens iris in the currently selected
pan-tilt head system is indicated by a 6-step display
(CLOSE  OPEN).
 ZOOM indicator
The position of the lens zoom in the currently selected
pan-tilt head system is indicated by a 6-step display
(WIDE  TELE).
 FOCUS indicator
The position of the lens focus in the currently selected
pan-tilt head system is indicated by a 6-step display
(NEAR  FAR).
 OPTION switches [A to H]
The "NOT USE", "DEF", "WIP", "HEATER/FAN", "LAMP",
"OPTION", "ND", "EXT" and "AF" functions can be
allocated to OPTION switches A to H by menu settings.
 HOME button
Press this to move the pan-tilt head and roll unit to the
home position.
 LCD CONTRAST control
Use this to adjust the contrast of the LCD panel.
32 (E)
Pan/Tilt Control Panel AW-RP400
0 Q
90 ° to the right