How To Replace The Zoom Switch - Panasonic AW-PH400E Bedienungsanleitung

Pan/Tilt Control Panel AW-RP400

How to replace the zoom switch

p Before replacing the zoom switch, turn off the power.
Remove the 4 screws that secure the zoom lever.
Pull out the zoom lever, disconnect the 2 cables from the
circuit board inside, and remove the zoom lever.
Plug the 2 cables extending from the zoom switch into the
connectors on the circuit board inside.
Secure the zoom switch using the 4 screws.
Screws V 4
Screws V 4
43 (E)