Trouble Shooting; Warranty And Repair - Apex MD300M Bedienungsanleitung

MD300M
hemoglobin saturation value (SpO ) of the sensors is compared to arterial hemoglobin
2
oxygen (SaO ) value, determined from blood samples with a laboratory CO-oximeter. The
2
accuracy of the sensors in comparison to the CO-oximeter samples measured over the SpO
range of 70%~99%. Accuracy data is calculated using the root-mean-squared (Arms value)
for all subjects, per ISO 9919:2005, Medical Electrical Equipment–Particular requirements for
the basic safety and essential performance of pulse oximeter equipment for medical use.

6.4 Trouble Shooting

a) The oximeter can't be powered on
Please check the batteries. If you use the external power supply, please check if the power
supply is connected with oximeter properly.
b) "Probe off" alarm
Please check if the probe is connected with the oximeter correctly. If the sensor is with
extension cable please check if the extension cable is connected with the sensor correctly.
c) "No finger" alarm
Please check whether the sensor is correctly connected with patient's finger.

6.5 Warranty and Repair

6.5.1 Maintenance Method
a) Maintenance responding time: 9:00am~17:30pm, Monday to Friday
b) Service support: our company offers the support by hot line, e-mail or spares parts.
Spare parts: our company changes parts if it is necessary free of charge in the warranty
period.
Because parts are the sources of maintenance, user should send them back to our company
if not specified.
c) Update the system software free of charge.
6.5.2 Exempt and Limitation
a) Our company isn't responsible for such damage caused by force majeure. For example:
fire, thunder flash, flood, cyclone, hail, earthquake, house collapse, commotion, plane failing
and traffic accident, deliberate damage, lack of fuel or water, labor and capital bother, strike
and stop-working etc.
b) Non-service items
● The corresponding charge and insurance charge of disassembling, refurbishing,
repackaging and moving the oximeter or the part of it.
● The damage caused by the third company not commended by our company to adjust,
install replace the parts of the oximeters.
● The damage and failure caused by the users incorrect operations not complying with the
operator's manual.
c) Our company will not provide the free maintenance in the warranty if the oximeter is
installed or connected with the external devices which are not permitted by Our company,
e.g. printer, computer, cable and lead to oximeter failure. Our company will charge for the
maintenance.
d) Responsibility limitation
PULSE OXIMETER
- 24 -
INSTRUCTION MANUAL
During the period of warranty, if user changes the parts manufactured by the third party
without our company permission, our company is entitled to stop contract.
2
6.5.3 Non-guarantee principle
●There is no-dispelled smut and not-original mark in the crust.
●There is physical damage on oximeter and its accessory.
●  T here are liquid leftover and eyewinker on oximeter and lead to short circuit and plugboard
failure.
●All the probe and accessories belong to consumption and beyond free change range.
●Such damage of probe caused by mechanical force doesn't belong to free change range.
●During measurement of SpO
measurement.
●  Maintenance seal of oximeter are not opened.
●  Not-original package lead to oximeter during transportation
●  N ot-professional person operation lead to oximeter failure. Not our company professionals
or authorized personnel disassemble oximeter and lead to oximeter failure.
●  Not carefully read manual and so wrong operation lead to oximeter damage and failure.
6.5.4 User's Special Request for Guarantee Time
Our guarantee constitution for oximeter complies with electronic product after-sale service
standard regulated by national laws. We regulate the guarantee time of hoistboard is one
year and all the accessories are three months. If users request the guarantee time beyond
our regulated guarantee time, we should take it into consideration. Because electronic
product has such character of quick changing, for such user asking more than three years
guarantee time, our company will not buy oximeter parts during maintenance. Our company
will upgrade oximeter or change new maintenance methods, for this, we charge the lowest
price for new oximeter with user permission.
6.5.5 Repackage
Take out all the accessories and put them into plastic cover. Try to use original package and
packing material. The user will be responsible for such damage caused by bad package
during transportation.
Please offer guarantee list and copy of invoice to standby with the period of guarantee.
Please describe failure phenomenon in detail and altogether offer the oximeter.
, principle leads to measure value difficult or inaccurate
2
- 25 -
MD300M