Attach The Zoom Gear To The Zoom Ring On The Lens; Attach The Digital Camera To The Camera Table - Olympus PT-E01 Bedienungsanleitung

Attach the zoom gear to the zoom ring on the lens

Zooming (or manual focusing when the 50 mm Macro lens is used) can be controlled by
attaching the zoom gear provided with the separately available Waterproof Port to the
zoom ring on the digital camera's lens.
For details, refer to the Waterproof Port's instruction manual.
CAUTION
: • Confirm that the zoom gear is locked firmly with the lock lever.

Attach the digital camera to the camera table

Before loading the digital camera in the Case, remove the camera table inside the front lid
of the Case and attached it to the digital camera.
(1) Attach the camera table to the tripod
seat on the bottom of the digital camera
by means of the tripod screw hole on
the digital camera.
En
(2) The camera table has fixed top-bottom
and front-rear orientations. Refer to the
illustration on the right to ensure that
you attach it with the correct orientation.
Zoom gear
• Confirm that the zoom gear is correctly installed on the lens by referring to
the Waterproof Port's instruction manual.
Lock lever
The lock lever is
used to lock the zoom gear.
Top
Bottom
E-17
Front
Rear