Installing The Digital Camera; Open The Case; Attach The Flash To The Camera And Raise The Light Emitting Part - Olympus PT-EP12 Bedienungsanleitung

3. Installing the digital camera

Open the Case

1 Slide the lock knob towards the arrow direction (1 of figure below).
2 Slide and hold the slide lock towards the arrow direction (2 of figure below) and turn the open/close
dial clockwise (3 of figure below).
3 Turn the open/close dial to the position where it cannot be turned further.
4 Open the rear lid of the Case gently.
Slide lock
2
Open
3
1
Open/close dial
Lock knob
CAUTION:
• Do not exert too much force while turning the open/close dial. Doing so may damage the dial.

Attach the flash to the camera and raise the light emitting part

Attach the flash supplied with the camera.
Make sure to raise the light emitting part.
EN
EN 13