Specifications - Olympus PT-E01 Bedienungsanleitung

Q12: What are the model numbers of the accessories for the PT-E01?
A12: The following accessories are available:
(1) O-rings for the PT-E01 body (POL-E01A, POL-E01B): These are silicone rubber O-
rings that have to be installed in the PT-E01 body to make it waterproof. There are two
types of O-rings. O-rings for other Case models cannot be used.
(2) Select the Waterproof Port model that matches the lens that will be used.
Waterproof Port Applicable Lenses
PPO-E01
PPO-E02
PPO-E03
PER-E01
(3) Grease for silicon O-ring (PSOLG-1): Exclusive grease for maintenance of the silicon
O-ring.
(4) Silica gel (SILCA-5): Desiccant agent to reduce fogging of the glass parts of the case
due to condensation.
You can order in large computer shops and camera mass sale stores.
Please contact your dealer or a service station of our company when replacement is
required. Replacement will be made against payment.

Specifications

Available models
Pressure resistance
Main materials
Dimensions
Weight
We reserve the right to change the external appearance and the specifications without
notice.
14-54mm Provided with special zoom gear.
14-54mm
Provided with special zoom gear.
11-22mm
Provided with special focus gear.
50mm Macro
The MF ring rotation range is limited to 180°.
When using the EC14, the PER-E01 should be
EC14
inserted between the Waterproof Port and Case.
Olympus Digital Camera E-300
Depth of up to 60 m
Main body: Transparent polycarbonate resin.
Release lever/power switch dial/mode dial/control dial/zoom
dial/camera table: Polycarbonate resin.
Port mount/camera table mount/pickup viewfinder frame/optional
bracket mount/zoom dial gear/TTL connector cap: Aluminum.
Operation buttons/buckles/accessory mount cover: Nickel-plated
brass.
Body cap: ABS resin.
O-rings: Silicone rubber.
Inner LCD hood: NBR rubber.
Width 214 mm x height 168 mm x thickness 148 mm
1800 g (LCD hood not included)
E-34
Remark
En