Advice About Ways Of Working When Sanding; Maintenance And Cleaning; Disposal; Information - Parkside XQ600 Bedienungs- Und Sicherheitshinweise

Commissioning / Maintenance and Cleaning / Disposal / Information
advice about ways of working
Q
when sanding
Note: apply light pressure only!
j
Move the appliance parallel, in extensive cir-
cles or alternatively to and across.
j
Clean the sanding pad occasionally with the
vacuum cleaner.
j
Never sand different materials with the same
sanding pad (e.g. wood then metal).
j
Only with faultless sanding sheets can you
obtain a good sanding performance and
spare the appliance.

Maintenance and Cleaning

Q
WaRNING! Before carrying out work on the
appliance, always remove the plug from the power
socket.
The rotary sander is maintenance free.
j
Clean the appliance regularly, preferably di-
rectly on completion of the task.
j
Always keep the device and the ventilation
slots clean. If the ventilation slots become
blocked it may lead to overheating and/or
damage to the device.
j
Do not allow any liquids to enter the device.
Use a dry cloth to clean the housing. Never
use petrol, solvents or cleaning agents that
might attack plastic.
j
Remove dust clinging to the sander
with a brush.
12 GB

Disposal

Q
The packaging is wholly composed of envi-
ronmentally-friendly materials that can be
disposed of at a local recycling centre.
Do not dispose of electrical
appliances in household waste.
In accordance with European Directive
2002 / 96 / EC on used electrical and electronic ap-
pliances and its implementation in national law, used
power tools must be collected separately and recy-
cled in an ecologically compatible manner. Please
return the tool via the available collection facilities.
Information on options for disposing of electrical
appliances after their useful life can be obtained
from your local or city council.

Information

Q

Servicing

Q
The service centre for your country is shown in the
guarantee documentation.
J
Have your device repaired only by qualified
specialist personnel using original manufactur-
er parts only. This will ensure that your device
remains safe to use.
J
If the plug or mains lead needs to be replaced,
always have the replacement carried out by
the manufacturer or its service centre. This will
ensure that your device remains safe to use.