List Of Pictograms Used; Introduction; Intended Use; Features - Parkside PDSP 1000 C3 Originalbetriebsanleitung

Introduction

List of pictograms used

Read the operating instructions
before setup/first use.
Wearing protective gloves
and protective clothing is
recommended.
AIR SANDBLASTER GUN
PDSP 1000 C3
 Introduction
Congratulations! You have purchased
one of our high-quality products.
Before setup or first use, please famil-
iarise yourself with the product. To do so, please
read through the following operating and safety
instructions carefully. This product must be set up
or used only by people who have been trained to
do so.
KEEP THIS DEVICE OUT OF THE REACH
OF CHILDREN!
 Intended use

The air-driven sandblasting gun PDSP 1000 C3
(hereinafter "device") is designed for removing rust
and paint from metal surfaces. Any other use or
modification of the device is considered a misuse
and carries a risk of serious accidents and/or
injury. We assume no liability for damage or injury
resulting from misuse. This device is intended for
use by private consumers only.
16
GB/IE/NI
292181 Druckluft-Sandstrahlpistole_content_LB8.indb 16
Always wear eye protection
while using or maintaining the
sandblasting machine.
Always wear respiratory protection
in dusty environments.
Always wear hearing protection.
 Features

Air-driven sandblasting gun
1
Barbed fitting for air supply
2
Trigger lever
3
Collecting bag for sandblasting material
4
Screw clamp
5
Blasting nozzle
6
Rotary control (1/0)
7
Blasting material tank
8
9 Screw cap
10 Wide-angle attachment
Spot attachment
11
Outer edge attachment
12
Inner edge attachment
13
14 Blasting material
 Package contents

1 air-driven sandblasting gun PDSP 1000 C3
1 wide-angle attachment
1 spot attachment
1 edge attachment
1 inner corner attachment
1 collecting bag for sandblasting material
1 screw clamp
2 kg blasting material
1 set of operating instructions
29.11.17 18:34