Engine Speed Recording On The Rear Side; Manual Entries In The Centre Field; The Right Chart For Your Tachograph; Operation - VDO KTCO 1318-24 Betriebsanleitung

3.4 Engine speed recording on the
rear side (Figure IV)
Tachograph charts with engine speed
recording are to be used on models
1318-25 and -26.
On the rear side of the driver's chart the
tachograph records the engine speed in
-1
real time in min .
The engine speed is recorded counter-
clockwise.
3.5

Manual entries in the centre field

(front side, figure V)
... before trip
Before insertion the following entries
must be made:
name and first name of the driver
place of departure
date of insertion (upper line)
vehicle registration number
beginning odometer reading
... after trip
complete the manual entries:
place of arrival
date of chart retrieval (bottom line)
ending odometer reading
distance travelled (by calculation).
© Continental Automotive GmbH
3.6 The right chart for your tacho-
graph (Figure VI)
When ordering tachograph charts, always
ensure that the full-scale value (and
approval number, if required) of the chart
corresponds to that of the tachograph.
Uni charts
The uni charts, e. g. ...-24 EC 4 K,
replace the special automatic charts
...-24 EC 4 B.
For electronic evaluations the charts
...-24/2 EC 4 B are still to be used.
Note
The recorded charts must be safely
stored and protected against damage.
4.

Operation

4.1 How to open/close the tacho-
graph (Figure VII)
The EEC tachograph 1318 may only be
opened when the vehicle is stationary.
Open your tachograph (1)
– Insert the key into the lock at the
top of the tachograph.
– Turn the key 90 ° to the left
(counter-clockwise).
– Lower the tachograph cover.
21