Installation Instructions; Important Matters - Atag CM 4111 AC Bedienungsanleitung

YOUR COFFEE MACHINE

9.1 Important matters

• After removing the packaging, make sure the product is complete
and undamaged. If in doubt, do not use the appliance and contact
a qualifi ed professional.
• Installation must be carried out by a qualifi ed techncian and in
compliance with current regulations.
• Packing elements (plastic bags, polystyrene etc.) must not be left
within reach of children as they may represent a hazard.
• Never install the appliance in environments where the
temperature may reach 0 °C or lower (the appliance may be
damaged if the water freezes).
• Make sure the mains voltage corresponds to the voltage indicated
on the appliance rating plate. Connect the appliance to an
effi ciently earthed socket with a minimum current rating of 10A
only. Th e manufacturer may not be considered liable for possible
incidents caused by the failure to adequately earth the mains.
• Th e power socket has to remain visible after installation.
• Do not use multiple plug adapters or extension leads.
• Th e power cable on this appliance must not be replaced by the
user as this operation requires the use of special tools. If the cable
is damaged or requires replacing, contact an authorised service
centre only to avoid all risks.
• For the electrical connection use a HO5 VV-F type cable as
indicated in the table below:
Conductors
230 V ~+ ~
• You should personalise water hardness as soon as possible
following the instructions in 6.2.2 on page 24 and 25.
GB 35

9 Installation instructions

Amount x size
3 x 1.0 mm 2